Made for concreters by concreters
Prime Same Day Sealer
Same Day Sealer is a penetrating, breathable primer coating designed for “same day” application on freshly poured concrete
Prime Exposure Acrylic Same Day Sealer is made using the finest acrylic polymers and is blended in Australia for Australian conditions.
Prime Same Day Sealer is ready to use and can be applied directly to green curing concrete.
It retains a wet/semi-gloss appearance, it also minimises substrate preparation and protects the surface whilst not allowing efflorescence to rise through it.
Our Same Day Sealer requires a second coat of either Prime Standard Sealer or Prime Coloured Sealer as the breathable resin in not as UV resistant or durable.
Coverage: Approximately 80m2 per 20 Litre Drum
Coverage will vary depending on substrate porosity.
Application Guide
- Check the concrete/surface is sufficiently cured and free of any excess surface moisture.
- Apply coating with a xylene resistant sprayer when the surface has cured enough as not to pit or remove any cement, you can apply with a roller which will require longer curing times.
- You must allow a minimum of 8 hours curing time before applying a second coat of Prime Standard Sealer or Prime Coloured Sealer.
Important Notice
Please read these important directions before use
SAFETY DIRECTIONS: Please ensure adequate ventilation, avoid breathing vapours by using Australian Standard class p1,p2 particulate respirator ensuring it is fitted correctly.
Do not use Prime Exposure Sealer whilst smoking or near naked light or flame. Remove all non-canned foods from area if adequate ventilation is not possible during application or drying.
Avoid contact with skin or eyes. Should any irritation occur, please seek medical advice.
SPILLS AND DISPOSAL: It is important to keep all sealers & xylene out of sewer and storm water drains. If spills occur, remove or isolate all ignition sources. Contain and absorb spill in dry, inert material such as sand. Collect in sealable containers and dispose of as trade waste in accordance with local authority guidelines.
CLEAN UP: Wash all equipment thoroughly in Prime Exposure xylene and allow to dry.
No responsibility can be accepted or any express or implied warranty given where performance of the product is affected by surface preparation, method of application or any other circumstances beyond the company’s control.
NOT TO BE TAKEN, KEEP OUT OF REACH OF CHILDREN
