Made for concreters by concreters
Prime Exposed Coat
Formulated using the latest technology with the finest materials
Prime Exposure Exposed Coat merges ease of application with uncompromising performance. By understanding the requirements of contractors, we developed EXPOSED COAT exposed aggregate sealer to be easily applied by spray unit or roller. Additionally, it boasts improved moisture tolerance when compared to traditional solvent clear sealers.
One of the key advantages for contractors is the potential cost effectiveness of EXPOSED COAT. With an estimated coverage of up to 6 square meters per litre, it offers great value for its coverage area, potentially reducing the amount of product needed for a given project.
Overall, EXPOSED COAT is a product that addresses both the practical considerations of application and the performance requirements. Experience the convenience, efficiency, and outstanding performance of EXPOSED COAT as it transforms your exposed aggregate projects into a resilient and visually stunning masterpiece.
Prime Exposure produces a number of sealers, to see our full sealer range click here!
BENEFITS
Prime Exposure’s EXPOSED COAT is a revolutionary custom designed exposed aggregate concrete sealer. Engineering a cutting-edge formulation specifically designed for exposed aggregate concrete contractors who demand perfection.
EXPOSED COAT merges ease of application with uncompromising performance.
EXPOSED COAT exposed aggregate sealer was developed to be easily applied by spray unit or roller. We understand the frustrations of having your exposed aggregate masterpieces potentially stained and damaged by other trades when you have not had the opportunity to seal immediately after completion. Exposed Coat eliminates this problem as you can seal and protect your project as soon as it is dry, saving time and money. Additionally, it boasts improved moisture tolerance when compared to traditional solvent based clear sealers.
EXPOSED COAT can be used on freshly poured exposed aggregate concrete and can be used on both old and new exposed aggregate concrete. EXPOSED COAT is UV resistant and will assist to protect your exposed aggregate from dirt, mould, staining, algae, moss, grime, and oils.
Application Guide
On new exposed aggregate, the area should be thoroughly acid washed at a dilution of 1-part hydrochloric acid to 10 parts water after exposing the aggregate surface with a high pressure cleaner. Using a stiff broom, rub the surface vigorously removing any loosely bound cement/scum and efflorescence. Ensure the surface is thoroughly rinsed clean after this process.
The concrete area must be free of any moisture or contaminants such as grease and oil prior to sealer application.
Apply coating with a solvent resistant sprayer or roller. Ensure Exposed Coat is applied without any pooling of sealer, too much sealer applied can result in the surface blistering and bubbling. We recommend two coats of Exposed Coat however; one coat will provide sufficient short term surface protection. You must allow a minimum of 8 hours curing time before applying a second coat of Exposed Coat Sealer.
PROPERTIES
Thinning: NOT REQUIRED
Application Rate: 4-6m²/litre/coat.
Touch dry in 1-2 hours – ambient temperature dependant.
Recoat Time: 8 hours
Full curing time: 5 days
Clean up: Prime Exposure Xylene Blend
